Building Code Requirements and Specification for Masonry Structures
Containing Building Code Requirements for Masonry Structures (TMS 402-08/ACI 530-08/ASCE 5-08, Specification for Masonry Structures (TMS 602-08/ACI 530.1-08/ASCE 6-08) and Companion Committees
The Code covers the design and construction of masonry structrures while the Specification is concerned with the minimum construction requirements for masonry in structures. Some of the...
Design-Build Contract Complexities
There are many approaches or options that an owner may pursue in acquiring facilities. Depending on the owner's objectives, the DB project approach may offer unique benefits,...
Project Definition and Conceptual Design
In order to select a DB contractor, the owner must define its requirements for project implementation and for the completed project. These requirements are typically incorporated into...
General Terms and Conditions
DB commercial contract terms can differ from conventional design-bid-build project terms, depending primarily on the owner's objectives, the level of risk that is to be assigned...
Specifications for Design-Build Projects
This chapter discusses the various specifications that come with a design-build project, including owner-generated specifications and contractor-generated specifications....
Geo-Denver 2007
New Peaks in Geotechnics
Proceedings of Geo-Denver 2007, New Peaks in Geotechnics, held in Denver, Colorado, February 18-21, 2007. Sponsored by the Geo-Institute of ASCE. This collection contains nearly 300 papers...
Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years: Volume Two
Prepared by the Program Committee, Offshore Technology Conference, of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...
Challenges in Drinking Water Distribution Systems Security Modeling
This paper is on challenges in drinking water distribution systems security modeling connected to OCMS, addressing research and practical issues coming-out from two recent activities which...
Structures Congress 2007
The Congress' technical program was designed with the practicing structural engineer in mind while maintaining a rigorous standard for the academic presentations. Topics include:...
The Need for Geotechnical Investigation
Knowledge of the subsurface conditions is needed to decide which type of foundation to use. In the discontinuous permafrost zone, some generalizations may be made about the location of...
Post and Pad
As the name implies, this type of foundation consists of a concrete or wood pad placed on or buried in the ground. It is the lowest priced option for buildings on frozen silt, which may...
Adjustable Foundation Design Development Innovations in Arctic Engineering
The purpose of adjustable foundation systems is to accommodate a wide variety of soils, including those which have low bearing capacity or which may be subject to settlement and/or horizontal...
Some Case Histories of Pile Foundations in Permafrost
Foundations for permafrost conditions should conform to one of three basic design principles: keep it frozen, let it thaw, or thaw the ground before construction. To keep the permafrost...
Design-Build Procurement
This section addresses suggested means for reaching agreement between owner and DB team on the definition of expected geotechnical conditions....
Hurricane Protection System
This chapter discusses hurricane protection systems. Topics include standard project hurricane, levees and floodwalls, datums and elevations, and interior drainage and pump stations....
Direct Causes of the Catastrophe
This chapter examines direct physical causes of the hurricane protection system failures, including soil strength assessments and pumping station limitations....
Contributing Factors
This chapter examines contributing factors of the hurricane protection system failures, including the underappreciated risk to New Orleans, a piecemeal implementation of the hurricane...
Strong Diagonals
Exterior Diagonal Systems that carry both gravity and lateral loads in building structures � known as exodiagonals or diagrids � are increasingly being used worldwide to provide freedom...
Foundation Engineering Handbook
Design and Construction with the 2006 International Building Code
This practical resource focuses on foundation engineering, emphasizing the geotechnical aspects and the use of the International Building Code(R). Chapters Include: . Chapter 1: Introduction...
Structural Steel Designer's Handbook
AISC, AASHTO, AISI, ASTM, AREMA, and ASCE-07 Design Standards
Mirroring the latest developments in materials, methods, codes, and standards in building and bridge design, this is a one-of-a-kind, definitive reference for engineers. Chapters include:...
Return to search